Armac H/650E/LED/V2 uninterruptible power supply (UPS) Line-Interactive 0.65 kVA 390 W 2 AC outlet(s)

REFRESHED DESIGN, SIMPLICITY OF USE

The Armac 650E/LED/V2 Home series UPS has been designed to meet the expectations that home users have for an emergency power supply during its normal use. The manufacturer has guaranteed accuracy and precision of workmanship at the production stage, which translates into the overall safety of the UPS and its solid operation. The device provides fully comprehensive protection and high efficiency while maintaining small size and an affordable price, meeting the requirements of current markets.

EMERGENCY POWER SUPPLY SYSTEM (UPS) – A SAFE CHOICE FOR YOUR HOME

Armac UPS is a product aimed at all those who expect to maintain power supply for important devices such as:

TVs, PCs, gaming consoles, Smart Home devices,
Chargers for phones, smartphones, notebooks, tablets,
Switches, routers, repeaters, extenders, VoIP phones,
Home & Hi-Fi Speakers, Camcorders, Digital Cameras,
NAS servers, network attached storage devices.

MICROPROCESSOR CONTROL – HIGH PERFORMANCE AND MONITORING OF SENSITIVE DEVICES

The correct operation of the emergency power supply is ensured by a specially built-in processor that controls the parameters of the device itself, its correct operation and the power supply of connected devices. The technology used in the UPS also ensures automatic battery charging in Stand-By mode and automatic start-up after the mains power returns.

ARMAC UPS SAFETY – OVERLOAD PROTECTION

Each Armac emergency power supply system is equipped with an overload protection module that protects the device itself from possible damage caused by excessive demand generated by the loads. When the UPS is overloaded (the "Overload" LED flashes and the device emits a continuous sound) during its normal operation, and the overload problem has not been resolved by the user within approximately 10 seconds, the UPS will automatically safely terminate the power supply to the devices connected to it.

SECURE INTERNET AND PHONE - SURGE PROTECTION RJ-11 / RJ-45

To further expand the range of devices that will be safe in the event of a power surge, the Armac UPS has 2 RJ-11 / RJ-45 ports on the rear, dedicated to the telephone line and telecommunications cabling. If any power surges or spikes occur on the network, the UPS will immediately detect and correct them, so that a safe signal is always sent to telephone and network devices.

AUTOMATIC VOLTAGE STABILIZER – AVR

The AVR (Automatic Voltage Correction) function in uninterruptible power supplies automatically adjusts low and high voltages from the outlet to safe levels, providing stable power to connected devices. This protects equipment from short-term voltage drops and surges that can damage it.

If the voltage is approximately 255 V or more, the UPS will transfer the mains voltage (AC) to the autotransformer (AVR) resulting in an output voltage within the allowable range of 195 V to 255 V,
If the voltage is approximately 195 V or less, the UPS will pass the mains voltage (AC) to the autotransformer (AVR) resulting in an output voltage within the allowable range of 195 V to 255 V.

DISCREET IN OPERATION – MUTE MODE

Anyone who values ​​peace and quiet would not want devices to make unwanted sounds signaling a change in operating status. In emergency power supply systems, UPS operation in battery mode is associated with sounds made every few seconds. It often happens that UPSs are placed near televisions, computers, desks, which when working on batteries can cause dissatisfaction in the household.

Armac does not intend to disturb the peace of users. That is why all UPS models have a silent operation function in battery mode. It will meet the expectations of the most demanding users who value quiet operation regardless of the device's operating mode.